How to Pair Poly Voyager 4310 headset to a Yealink phone

To connect a Poly Voyager 4310 headset to a Yealink T54W phone using Bluetooth, follow these steps:

Prepare Your Devices:

Ensure that both your Poly Voyager 4310 headset and Yealink T54W phone are fully charged and turned on.

Enable Bluetooth on the Yealink T54W:

On the Yealink T54W phone, navigate to the settings menu.
Go to Menu
Then scroll down to Basic Settings
Look for the Bluetooth settings option and enter into it.
Enable Bluetooth if it's not already turned on.

Put Poly Voyager 4310 in Pairing Mode:

Turn on your Poly Voyager 4310 headset.
Enter pairing mode on the headset. Typically, this involves pressing and holding the "ON" switch to the
Bluetooth button until the LED light starts flashing blue and red alternately.

Pair the Devices:

On the Yealink T54W phone, search for available Bluetooth devices.
It should detect your Poly Voyager 4310 headset in the list of available devices.
Select the Voyager 4310 headset from the list.
If prompted, enter the PIN code for pairing. The default PIN for many devices is often "0000"
Once paired successfully, you should see a confirmation message on both devices.

Test the Connection:

Once paired, test the connection by making a test call or playing some audio from your Yealink phone.
Ensure that the audio is routed through your Poly Voyager 4310 headset.

Use Your Devices:

Now that your Poly Voyager 4310 headset is connected to your Yealink T54W phone via Bluetooth, you can use it to make and receive calls wirelessly.

Disconnecting:

To disconnect the headset, you can either turn off Bluetooth on your Yealink T54W phone or manually disconnect the headset from the Bluetooth settings menu on the phone.

By following these steps, you should be able to successfully connect your Poly Voyager 4310 headset to your Yealink T54W phone via Bluetooth. If you encounter any issues, refer to the user manuals of both devices for troubleshooting tips or contact their respective customer support for assistance.